Handguards

Compare up to 3 products now
0 Item selected for comparison
Select up to three products for comparison by clicking on the icon next to the corresponding product in the product list.
Select up to three products for comparison by clicking on the icon next to the corresponding product in the product list.
Select up to three products for comparison by clicking on the icon next to the corresponding product in the product list.
    Sort:
    Filter
  • Clawgear AUG M-LOK Handguard

    AUG M-LOK Handguard

    Clawgear finally brings a versatile and lightweight low profile handguard to the Steyr AUG and same time also introduces M-LOK and Keymod platform to this weapon system. Sophisticated engineered and fully field tested for uncompromising fightability and operator-friendliness. Solid one piece construction, made of hard coated aluminium (Mil-8625-F type III, class II) for perfect combination of low weight and highest mechanical stability. The AUG M-LOK handguard features twelve mounting slots for limitless versatility and does not interfere with most silencers and muzzle devices. 100% engineered, field testet and produced in Austria.Compatibility:Steyr AUG A1/A2, AUG A3 SF, AUG P, AUG Z, AUG LMG variants, AUG SA variants, MSAR STG-556.Does not fit AUG A3, AUG Z A3, AUG 9mm variants
    CHF 269.90

    In stock

  • Clawgear AUG Heatshield M-LOK

    AUG Heatshield M-LOK

    CHF 29.90

    In stock

  • Clawgear Keymod 9 Slot Rail

    Keymod 9 Slot Rail

    CHF 33.90

    In stock

  • Clawgear M-LOK 7 Slot Rail

    M-LOK 7 Slot Rail

    Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 7 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.
    CHF 29.90

    In stock

  • Clawgear Keymod 3 Slot Rail

    Keymod 3 Slot Rail

    CHF 21.90

    In stock

  • Clawgear AUG MSM 10 Slot Rail

    AUG MSM 10 Slot Rail

    Clawgear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.NATO STANAG 4694 RailThe 10 slot Picatinny rail allows the user to upgrade his Modular Scope Mount equipped AUG rifle with additional accessories.SurfaceHigh alloy aluminium with anodized coating (MIL-8625-F type III, class II) for heavy use.This rails fits the AUG Modular Scope Mount (Art.Nr. 20114)
    CHF 29.90

    In stock

  • Clawgear Keymod 7 Slot Rail

    Keymod 7 Slot Rail

    CHF 29.90

    In stock

  • Clawgear AK47 Long Slick Handguard M-LOK

    AK47 Long Slick Handguard M-LOK

    • Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
    CHF 179.90

    In stock

  • Clawgear M-LOK 3 Slot Rail

    M-LOK 3 Slot Rail

    Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 3 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.
    CHF 22.90

    In stock

  • Clawgear M-LOK T-Nut Replacement Set

    M-LOK T-Nut Replacement Set

    Spare mounting hardware for all kind of M-LOK accessories.Feature List:• T Nuts made of stainless steel to avoid corrosion.No coating that can wear off or chip away whenmounted and dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.
    CHF 7.90

    In stock

  • Clawgear AK47 Medium Slick Handguard M-LOK

    AK47 Medium Slick Handguard M-LOK

    • Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers with a front sling loop on the gasblock• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
    CHF 162.90

    Currently not in stock

  • Clawgear AK47 Short Slick Handguard M-LOK

    AK47 Short Slick Handguard M-LOK

    • Matt black non-glare surface coating to reduce reflections• QD sling attachment point on the rear side of the handguard• M-LOK mounting system to fit all types of M-LOK accessories: rails, vertical grips, AFG, ...• Fits a wide variety of AK 47‘s with stamped and milled receivers• Lightweight construction made out of high strength 6061 aluminium with MIL-SPEC type III hardcoat anodize finish
    CHF 139.90

    Currently not in stock

  • Clawgear AK47 Gas Tube Cover

    AK47 Gas Tube Cover

    The Clawgear AK Gasetube Cover is an Upgrade part that works in combination with the CG Slimline Handguard.PLEASE NOTE: This Gasetube Cover works ONLY in combination with the Slimline Handguard.Features:• Upgrade part for the Clawgear AK 47 slick handguard• Mil-STD 1913 Picatinny / Stanag 4694 rail on top• Made from high strength aluminium with black milspec hard coating
    CHF 109.90

    Currently not in stock

  • Clawgear 45 Degrees Mount M-LOK

    45 Degrees Mount M-LOK

    RAIL M-LOK INCLINÉ À 45 DEGRÉS
    CHF 44.90

    Currently not in stock

  • Clawgear M-LOK 5 Slot Rail

    M-LOK 5 Slot Rail

    Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 5 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.
    CHF 24.90

    Currently not in stock

  • Clawgear Keymod 5 Slot Rail

    Keymod 5 Slot Rail

    CHF 23.90

    Currently not in stock

  • Clawgear 45 Degrees Mount Keymod

    45 Degrees Mount Keymod

    RAIL KEYMOD INCLINÉ À 45 DEGRÉS
    CHF 44.90

    Currently not in stock

  • Clawgear M-LOK 9 Slot Rail

    M-LOK 9 Slot Rail

    Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 9 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.*
    CHF 32.90

    Currently not in stock