Vendita

The CLAWGEAR® Field Shirt is a medium weight, fast-drying product for use by military and law enforcement professionals. The CLASSIC configuration uses a 220 GSM (6.5O PSY) 50% Nylon and 50% Cotton rip-stop textile. The Raider pants feature eight pockets with the ability for personal equipment attachment. The product is constructed using twin-needle sewing for strength and flat-locked seams for comfort. Fine-tuning of fit is achievable through hook-and-loop waist tabs, external leg tabs with hook-and-loop adjustment, and an internal knee locking cord.

The CLAWGEAR® Raider Field Pants are the lightest, most durable pants for extended deployment tasks. The ergonomic design and CLAWGEAR® ATS materials allow an unrestricted range of movement. The lightweight material significantly reduces water pick-up and offers faster drying times while DARKSTONE™ provides enhanced abrasion resistance and durability. The Raider pants feature eight pockets with the ability for personal equipment attachment. The product is constructed using twin-needle sewing for strength and flat-locked seams for comfort. Fine-tuning of fit is achievable through hook-and-loop waist tabs, external leg tabs with hook-and-loop adjustment, and an internal knee locking cord.

The CLAWGEAR® Operator Combat Pants have been configured for light and fast, short-duration tasks. They feature a lower profile design and the CLAWGEAR® ATS materials allow an unrestricted range of movement. The lightweight material significantly reduces water pick-up and offers faster drying times while DARKSTONE™ provides enhanced abrasion resistance and durability. The Operator Combat Pants feature four pockets with the ability for personal equipment attachment. The lower leg also has the provision for the attachment of items such as IR beacons or tourniquets depending on task or unit procedures. The product is constructed using twin-needle sewing with all seams flat-locked for comfort. Fine-tuning of fit is achievable through hook-and-loop waist tabs, external leg tabs with hook-and-loop adjustment, and an internal knee locking cord.

The CLAWGEAR® Combat Shirt Classic is a medium weight, fast-drying product for use by military and law enforcement professionals. The CLASSIC configuration uses a 220 GSM (6.5O PSY) 50% Nylon and 50% Cotton rip-stop textile.    Designed to be worn as a stand-alone item or below ballistic protection carriers or stab-resistant vests. The ergonomic design and low-profile seams provide exceptional next-to-skin comfort and freedom of movement while the highly breathable textile supports evaporative cooling in higher temperatures. Careful consideration has been given to color mapping to insure that camouflage patterns and colors provide the maximum level of coverage. The material used in the exposed is a CLAWGEAR® development that allows mechanical stretch for an extended range of movement. On both upper arms, a low-profile storage pocket is provided with YKK reverse coil zipper closure. Inside the pocket, beckets are provided for the safe attachment of equipment or the storage of individual first aid items. The outer upper sleeve incorporates Velcro® loop patches and webbings feature for the attachment of IFF indicators, V-LITE®, or other unit items.

The CLAWGEAR® Raider Combat Shirt is a lightweight, fast-drying product for use by military and law enforcement professionals. Designed to be worn as a stand-alone item or below ballistic protection carriers or stab-resistant vests. The ergonomic design and low-profile seams provide exceptional next-to-skin comfort and freedom of movement while the highly breathable textile supports evaporative cooling in higher temperatures. Careful consideration has been given to color mapping to insure that camouflage patterns and colors provide the maximum level of coverage. The material used in the exposed is a CLAWGEAR® development that allows mechanical stretch for an extended range of movement. On both upper arms, a bellows-style storage pocket is provided with YKK reverse coil zipper closure. Inside the pocket, beckets are provided for the safe attachment of equipment or the storage of individual first aid items. The outer sleeve incorporates bellows pockets, VELCRO® loop patches, and webbing features for the attachment of IFF indicators, V-Lite, or other unit items.

The CLAWGEAR® ATS Operator Field Shirt is a next-generation battle dress field shirt. It takes the DNA and learning from the original CLAWGEAR® field shirt and brings it to a new level. The new design is lighter, faster drying, more breathable, and provides an extended range of movement due to the use of our ATS technology Careful consideration has been given to the color mapping to insure that camouflage patterns and colors do not contrast. Upper arms feature low-profile storage pockets with YKK reverse coil zipper closure. Inside the pocket, beckets are provided for the safe attachment of equipment or the storage of individual first aid items or other equipment. The outer upper sleeve incorporates VELCRO® loop patches and webbing features for the attachment of IFF indicators, V-Lite®, or other unit items.

The CLAWGEAR® Field Shirt is a medium weight, fast-drying product for use by military and law enforcement professionals. The CLASSIC configuration uses a 220 GSM (6.5O PSY) 50% Nylon and 50% Cotton rip-stop textile. The new design is lighter, faster drying, more breathable, and provides an extended range of movement due to the use of our ATS technology. This style is designed with extended deployment and multi-role capability. The ergonomic design includes mesh venting in the front pockets and rear darts. The provision for belt-mounted side arms has been included using zippered access. Careful consideration has been given to the color mapping to insure that camouflage patterns and colors do not contrast. On both upper arms, a bellows-style storage pocket is provided with YKK reverse coil zipper closure. Inside the pocket, beckets are provided for the safe attachment of equipment or the storage of individual first aid items. The outer upper sleeve incorporates bellows pockets VELCRO® loop patches and webbing features for the attachment of IFF indicators, V-Lite®, or other unit items.

The CLAWGEAR® Combat Shirt is a lightweight, fast-drying product for use by military and law enforcement professionals. Designed to be worn as a stand-alone item or below ballistic protection carriers or stab-resistant vests. The ergonomic design and low-profile seams provide exceptional next-to-skin comfort and freedom of movement while the highly breathable textile supports evaporative cooling in higher temperatures. Careful consideration has been given to color mapping to insure that camouflage patterns and colors provide the maximum level of coverage. The material used in the exposed is a CLAWGEAR® development that allows mechanical stretch for an extended range of movement. On both upper arms, a low-profile storage pocket is provided with YKK reverse coil zipper closure. Inside the pocket, beckets are provided for the safe attachment of equipment or the storage of individual first aid items. The outer upper sleeve incorporates Velcro® loop patches and webbings feature for the attachment of IFF indicators, V-LITE®, or other unit items.

The CLAWGEAR® ATS Raider Field Shirt is a next-generation battle dress field shirt. It takes the DNA and learning from the original CLAWGEAR® field shirt and brings it to a new level. The new design is lighter, faster drying, more breathable, and provides an extended range of movement due to the use of our ATS technology. This style is designed with extended deployment and multi-role capability. The ergonomic design includes mesh venting in the front pockets and rear darts. The provision for belt-mounted side arms has been included using zippered access. Careful consideration has been given to the color mapping to insure that camouflage patterns and colors do not contrast. On both upper arms, a bellows-style storage pocket is provided with YKK reverse coil zipper closure. Inside the pocket, beckets are provided for the safe attachment of equipment or the storage of individual first aid items. The outer upper sleeve incorporates bellows pockets VELCRO® loop patches and webbing features for the attachment of IFF indicators, V-Lite®, or other unit items.

Clawgear finally brings a versatile and lightweight low profile handguard to the Steyr AUG and same time also introduces M-LOK and Keymod platform to this weapon system. Sophisticated engineered and fully field tested for uncompromising fightability and operator-friendliness. Solid one piece construction, made of hard coated aluminium (Mil-8625-F type III, class II) for perfect combination of low weight and highest mechanical stability. The AUG M-LOK handguard features twelve mounting slots for limitless versatility and does not interfere with most silencers and muzzle devices. 100% engineered, field testet and produced in Austria.Compatibility:Steyr AUG A1/A2, AUG A3 SF, AUG P, AUG Z, AUG LMG variants, AUG SA variants, MSAR STG-556.Does not fit AUG A3, AUG Z A3, AUG 9mm variants

Iron Sight Set consisting of Front and Rear sightFeatures:• Fit MIL-STD-1913 Picatinny / STANAG 4694 Rails• Low Profile-foldable when not in use• Hardened and non-reflective coating• Durable metal construction• Tool-free adjustable front elevation and rearwindage

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The Enforcer Pant is a real multi purpose platform, combining all essential elements of a modern lightweight combat pant and an advanced tactical pant. Mechanical stretch fabric provides superior ease of movement when necessary. The knee compartment can be equipped from the inside with protectors for secure kneeing. It also features a gaiter lace hook at the bottom, preventing from moving upwards. Integrated cargo pocket features a separated compartment to store a smartphone or other gadgets and tools. Waist adjustment straps are as well included as mounting loops to keep your retention lanyard in secure position.Gaiter lace hooksKnee compartment can be equipped with protectorsMechanical stretch fabricInset hidden cargo pocketWaist adjustment system

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction, the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line or on the range, the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Mounting NotchesTwelve mounting grooves allow the compensator to fit on any AK based weapon system.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityAK-47, AKM, RPK, AK-74 and all variants based on these models with 14x1 LH muzzle thread. Does not fit on AK-100 Series, AKS-74U, Saiga riflesInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, screw the compensator counterclockwise on the barrel and push the locking pin on the front sight base completely flat. Screw the compensator tight and release the locking pin into the next mounting notch available. Before using a silencer make sure the compensator is not moving at all.

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Garmin GPSmap pouch is designed for this unit or similar in size. The pouch can be unfolded to easily access the screen and buttons without taking out the device. The GPS holding compartment has a transparent foil for additional screen protection. The pouch closing flap has a special cutout for the GPS antenna and it’s closed with a plastic buckle.Features:Designed for handheld GPS Devices such as Garmin or similar in sizeMade of 500D Nylon and bonded Laminate for extreme robustnessPlastic buckle closure/openingMOLLE system compatibleFoldable opening for easy radio accessFabrics:500D Nylon bonded with NBR fabric500D NylonWoojin plastic partsNylon WebbingDimensions:Height: 12cmWidth: 6,5cmDepth: 3,5cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Large Horizontal Utility Pouch LC is made to extend storage space. External laser cutouts allow mounting various accessories.Features:Large Horizontal Utility PouchMade of 500D Nylon and bonded Laminate for extreme robustnessLaser cut MOLLEMOLLE system compatibleInternal flat pocketLow Profile designFabrics:500D Nylon bonded with NBR fabric500D NylonYKK ZipperDimensions:Height: 15cmWidth: 26cmDepth: 7cm

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Flip Up Rear Iron SightFeatures:• Fit MIL-STD-1913 Picatinny / STANAG 4694 Rails• Low Profile-foldable when not in use• Hardened and non-reflective Coating• Durable metal construction• Tool-free adjustable windage

Special Limited Edition

Made of high strength aluminum with Mil-Spec Type III hard coat anodized finishFeatures a non-glare coating to reduce reflectionsMakes the A3 rifle compatible with the Clawgear AUG HandguardFeatures a 30 slot picatinny rail (NATO STANAG 4694)Anti-rotational QD attachment point at the front

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

The Starblast compensator is the newest model of the CG Muzzle devices. It is a hybrid design of a muzzle brake and compensator.Outfitted with the Nato A2 standard interface to provide the option to mount any suppressor or blast deflector with the NATO QD mount(B&T Rotex V, Steyr UMS, or the Blast Deflector from B&T).Compatibility: All AR-15 and M16 variants in .223 or 5.56 mm caliber with a barrel thread of 1/2 x 28 TPI UNEF, for example: Hera Arms The 15th, Schmeisser AR15, DPMS AR-15,Steyr STM556 etc. Does not fit Oberland Arms OA-15

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The G36/SG751 SAPR Magazine pouch is made of super light and durable bonded fabric. Adjustable bungee Pull Tab keeps the magazine safe in place. The External MOLLE laser cut-outs allow pouch stacking. Low profile design due to thin lined laser cut-outs.Features:Single G36 / SG751 Magazine PouchMade of bonded Laminate for extreme robustnessMOLLE system compatibleLaser cut MOLLEAdjustable Pull Tab Magazine RetentionLow Profile designFabrics:500D Nylon bonded with NBR fabricWoojin plastic partsDimensions:Height: 14cmWidth: 9,5cmDepth: 3cm

Clawgear‘s muzzle device products are designed to increase weapon performance and handling. Due to it‘s hardened steel construction, this rugged and high quality item will serve you in any combat situation.The Blast Forward Compensator is a linear type of compensator. Due to the design of the inside construction the muzzle blast is guided straight forward. This decreases the user’s exposure to noise, exhaust gases and powder particles as well the muzzle blast. Especially useful in confined spaces (CQB) and for those who are operating in a team. Also when standing alongside next to each other on the firing line, or on the range the Clawgear BFC is the ideal choice.Made from steel and treated with a black surface coating to make it even more durable. It is ideal for short barrel rifles, with no barrel length restrictions.3 Expansion ChambersThe construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.Counter NutMount the G3/G36 BF Compensator with the counter nut to ensure a secure fit on the barrel.Breacher SpikesThese hardened steel spikes allow the user to destroy barriers in CQB situations. They can also be used as a fastening point with the included tool.Closed BodyForwards exhaust gases and noise away from the user.CompatibilityH&K G36 and variants, H&K 416 and variants, OA-10, H&K G3 and variants with M15x1 muzzle threadInstallationMake sure your weapon is unloaded and safe. Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, put the crush washer over the thread (the conical end facing towards muzzle). Screw the compensator clockwise on the barrel by hand until it fits snugly. Then use a 19 mm wrench or the included tool to tighten the compensator until the Claw Gear logo faces upwards.

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.A single HK417 Magazine pouch is made of super light and durable bonded fabric. Adjustable bungee Pull Tab keeps the magazine safe in place. The External MOLLE laser cut-outs allow pouch stacking. Low profile design due to thin lined laser cut-outs.Features:Single HK417 Magazine PouchMade of bonded Laminate for extreme robustnessMOLLE system compatibleLaser cut MOLLEAdjustable Pull Tab Magazine RetentionLow Profile designFabrics:500D Nylon bonded with NBR fabricWoojin plastic partsDimensions:Height: 15cmWidth: 10cmDepth: 3cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.The Sniper Rifle Sling Padded Snap Hook is a classic length adjustable two-point sling. Both sling ends have a steel Snap Hook. The center section of the sling has thick padding which is suitable for heavier weapons providing the user with more comfort during long wear.Features:Fully adjustable Two-point SlingPull Tab for fast length adjustmentSnap Hook at each sling endDifferent mounting options can be added at each sling endStiff Nylon WebbingSnap Hook covered with an elastic webbing collar to prevent weapon from scratchingCenter Section heavily Padded for improved comfortCompatible with all Clawgear Front/End KitsFabrics:32mm WebbingACW and ITW Nexus plastic partsNylon Webbing500D NylonSteel Snap Hook

In the CIL we have conceived an extremely light and versatile warm layer with excellent performance and low stowage requirement. Climashield Apex (67 gsm) is a insulation material which has been well tested and used militarily. This feather light material has a high resistance to tearing, good moisture transfer qualities and can still be packed in a tiny space.Ultra light design for maximum performanceClimashield Apex (67 gsm) insulationElastic cuffs on armsRoomy front pocketsFolds into its own envelopeShell is made of low noise micro rip stop nylon fabric

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.A classic single Magazine Shingle with adjustable bungee cord pull tab retention. External MOLLE webbing for pouch stacking. Core line products design is focused on longevity and simplicity.Features:Designed for a single 5.56 / AK MagazineMade of 500D NylonMOLLE system compatibleAdjustable Magazine RetentionFabrics:500D NylonNylon WebbingDimensions:Height: 13cmWidth: 8,5cmDepth: 2cm

The woven patches series from Clawgear features an outstanding quality. The series is a return to a proven old school solution, but realised with latest production equipment which allows to create a low profile and light weight patch in an incredibly high resolution. The new age hook side on the backside only attaches to loop side surfaces and does not destroy knit surfaces or the sewing threads of your baselayer.

Picatinny Rail for M-LOKFeature List:• Picatinny Rail for M-LOK interface with 7 slots.• Made from hight strength aluminium and a durablehard coat anodized finish, that meets Mil specrequirements.• Mounting hardware included (Nuts and Screws), withstainless steel T Nuts to avoid corrosion. Nocoating that can wear off or chip away when mountedand dismounted several times.Note:When mounting the Rail and tightening the screws, be sure not to overtighten them.The proper torque specs are max. 4Nm or 35in/lb.Tip: Use the short handle of the Allen key for tightening.

Flip Up Front Iron SightFeatures:• Fit MIL-STD-1913 Picatinny / STANAG 4694 Rails• Low Profile-foldable when not in use• Hardened and non-reflective Coating• Durable metal construction• Tool-free adjustable elevation